Critical Examinations

A critical examination of safe operation is required to be carried out on newly installed equipment which generates X-rays, or houses a radioactive sealed source.

The examination is carried out during the commissioning stage to ensure that:

• All safety features operate correctly
• There is sufficient protection from exposure to ionising radiations
• Sufficient information is given to the customer

Radman Associates assist with the examination of any installed equipment such as fill and level gauges, X-ray cabinets, inspection devices and any other devices employing sealed sources or X-rays.

We test all safety provisions and warning devices and measure radiation levels around the installed equipment.

Need help?

To arrange a critical examination please email Jill Wilkinson
or call 0845 226 7248.

| Save this page | Home

Please type your question.. Name:   Email:

Radiation protection advice

RPA Service Contracts
Radiological Assessment
   (For RSA93 compliance)
Critical Examination
   (For IRR99 compliance)
Contamination Survey
   (Land and Buildings)
Lab Clearance Survey

Statutory requirement for a critical examination

IRR99 Reg 31(2) requires any person who erects or installs equipment which emits radiation at a workplace to:

1. Undertake a critical examination of the proper operation of all safety features and warning devices, and to ensure sufficient protection from radiation.

2. Consult with an RPA on the nature of the examination and the results obtained.

3. Provide the employer with information about proper use, testing and maintenance of the equipment.